The method of using the mesh belt conveyor is as follows:
1. Turn on the main power switch and check whether the power supply of the device is normal and the power indicator is on. After normal, proceed to the next operation.
2. Close the power switch of each circuit and check if it is normal. Under normal conditions: the device does not work, the running indicator of the mesh belt conveyor is off, the power indicator of the inverter and other equipment is on, and the display panel of the inverter is normal.
3. Start each electrical equipment in turn according to the process flow, and start the next electrical equipment after the previous electrical equipment starts normally. Xi'an conveyor
4. In the operation of the mesh belt conveyor, it is necessary to abide by the provisions of the articles in the design of the articles to be transported and the transport capacity of the mesh belt conveyor. Secondly, we must pay attention that all kinds of personnel must not touch the moving part of the mesh belt conveyor, and non-professionals must not touch the electrical components and control buttons at will. Later, during the operation of the mesh belt conveyor, the rear stage of the inverter cannot be disconnected. If it is determined that maintenance is required, it must be carried out when the inverter operation is stopped, otherwise the inverter may be damaged. Xi'an conveyor
5. The mesh belt conveyor stops running. Press the stop button to shut off the main power supply after the system has stopped.